Data:
Power: min: 1.5m3 / h; max: 3m3 / h; rated: 2.2m3 / h
Capacity: 80m3 / nk / regeneration
Example: In the case of 17 nk water, the amount of detachable water between the two regenerations is 80/17 = 4.7 m3, which is an average 4-5 person household approx. 1 water demand per week
Resin charge: 25 liters
Salt demand: 5.1 kg / regeneration
Equipment features:
- displays the current water consumption,
- shows the amount of remaining soft water available (m3),
- shows the number of days remaining until regeneration,
- shows the exact time,
- shows the amount of water produced since the last regeneration,
- The regeneration time can be set according to the water intake minimum - this usually takes place between 2 and 3 hours at night, but the time can be adjusted.
- 63 days can retrieve the date of regeneration and the amount of water used daily.
- Consists of spare capacity: it changes the time of regeneration by monitoring past consumption data. So if, for example, 750 liters of water have been used every Thursday during the previous weeks, and the remaining capacity is only 450 liters then regenerating at night (naturally at the time of delay)
- The equipment takes into account the amount of re-mixing so that it saves a significant amount of salt.
The amount of raw water re-mixing usually takes 5-7 German degrees of hardness, as this is acceptable from the point of view of consumption and pool bubbles.
You can check the water hardness:
- at your home with a Total Hardness Tester
- or you can bring it to us for inspection in our laboratory.
OTH license number: OTH 3723-2004
