disinfectant with chlorine-free auxiliary additive for recirculated swimming-pools

Application:
This is the further developed version of DINAX KLORIN F.
It incorporates all the advantages of DINAX KLORIN F. Due to the additive, there is no chlorine smell in the swimming-pool at higher chlorine levels either. The additive widens the disinfection spectrum.

150 g/l sodium-hypochlorite containing disinfectant that - thanks to the special production procedure- does not degrade and crystallize so easily as other similar products. It is especially developed for swimming-pool use, dosing by chemical dosing pump, for the disinfection of recirculated swimming-pool water. Due to the anticrystallization treatment, less failure of chemical dosing automats and no clogging of the plumbing is experienced, as the structure of crystals is modified and the precipitates are unable to stick to the plumbing surfaces (e.g. chemical dosing tube, inner surface of the dosing pump).

Measurement:
You can measure the free active chlorine level by teststrips, coloritmetric testers.
For the measurement of total chlorine it is better to use a digital device (photometer). The ideal free active chlorine level in swimming-pool water: 0,3–1 mg/l.
The pH value of the water: the chemical is the most effective at a pH of 7.1 - 7.4 range The use of DINAX KLORIN F with additive product increases the pH of water!

Available packaging sizes: 25 kgs returnable can, 1000 kgs IBC-container

Take care when using disinfectants. Always read the label and the instruction manual before use.

Attention! This product's container is returnable.


Hazard Information:








Danger
Causes severe skin burns and eye damage.
Very toxic to aquatic life.
Contact with acids liberates toxic gas.