Chlorine-free disinfectant (liquid)

For disinfecting surfaces:
Dewan-7 is diluted 1:6 with water immediately before use
(1 litre of Dewan-7 to 6 litres of water). The time of action is 10 minutes, after which the surface can be rinsed or, if possible, left to dry.

For disinfecting bath water: Do not dilute!
The product can be dosed in hydrogen peroxide at a minimum maintenance level of 25 mg/l and a shock concentration of 100 mg/l, corresponding to a minimum level of 50 mg/l and a shock level of 200 mg/l for DEWAN^®-50.

At refill: to achieve 50 mg/l DEWAN^®-50, 3.6 l DEWAN^®-7 per 10 m³ of pool water is required.
To achieve 200 mg/l DEWAN^®-50, 14.5 l DEWAN^®-7 per 10 m3 of pool water is required.

The quantity to be used after the start of use depends on the bathing load.

For regular use of the bath, the recommended dosage is 1 m³ bathing water per week:

- 1,2 litres DEWAN^®-7

For recirculation pools, the quantity required to ensure a DEWAN^®-50 level of 50 mg/l should be added to the recirculated water by means of a pump, according to the instructions for use of the equipment. For small pools, pour directly into the bathing water and wait 30 minutes before use.

Measurement: (see ACCESSORIES)
The ideal concentration of the agent in swimming pool water expressed as DEWAN-50 is 50-200 mg/l, corresponding to 25-100 mg/l hydrogen peroxide.

Be careful when using disinfectants! Always read the label and instructions before use!