DINAX® FLOCK F EXTRA is designed to flocculate floating impurities carried by the filters of the water circulation system of swimming pools and to reduce the phosphate content of the circulating water.

For residential and professional use.

APPLICATION:
The use of DINAX^® FLOCK F EXTRA is recommended in cases of opalescence of pool water or in post algae removal situations, and also helps to filter iron from the water as suspended impurities and to bind phosphate in the water. The product helps to purify water more quickly by breaking down floating impurities in the filters of the water circulation system into flakes and can prevent algae growth by keeping phosphate levels low.
The product is added to the water after dilution. It can be used with any disinfectant. Recommended pH: between 6.5 and 7.5.

DOSAGE:
DINAX^® FLOCK F EXTRA liquid should be added to the bath water occasionally, in case of opacity, evenly distributed on the surface of the water. For dosing, the product must be diluted! Dilution must be carried out on site immediately before use: add 100 ml DINAX^® FLOCK F EXTRA in the bottle to the drinking water up to the 1000 ml mark on the side of the bottle, cap and mix the liquids.

1000 ml of diluted DINAX^® FLOCK F EXTRA is recommended for 10 m³ of bathing water. You can also use the scale on the side of the bottle to measure out smaller quantities. Pour the required amount of diluted liquid into the pool, spreading it evenly over the surface of the water. After dosing, swirl the water to ensure proper mixing.After 6 hours, the flakes formed will be vacuumed from the bottom of the pool and can be removed by the filter after the water has been turned over again.
Wash the sand filter after vacuuming!

An overdose of the product can also cause opalescence, which will disappear after 1-3 days.
When administered as described, phosphate levels in pool water are reduced by 1 mg/l.

Registration number: NNGYK/37729-6/2024